Siemens SIMOTION D425-2

Diagnostics
8.1 Diagnostics via LED displays
SIMOTION D4x5-2
350 Commissioning and Hardware Installation Manual, 02/2012
Meaning LED display
RDY RUN STOP SU/PF SF DP DP/MPI PN SY/MT OPT
Upgrade/downgrade of
DRIVE-CLiQ components running
0.5/1
(yellow)
x x x x x x x x x
The upgrade/downgrade of
DRIVE-CLiQ components is
completed (power OFF/ON of the
upgraded/downgraded devices is
necessary)
2/1
(yellow)
x x x x x x x x x
PROFIBUS DP interfaces as master
No parameter assignment
available
x x x x x 0 0 x x x
At least one slave is missing x x x x x 1
(red)
1
(red)
x x x
Bus status "Clear" x x x x x 0.5/1
(green)
0.5/1
(green)
x x x
Bus status "Operate" x x x x x 1
(green)
1
(green)
x x x
PROFIBUS DP interfaces as i-slave
No parameter assignment
available
x x x x x 0 0 x x x
No parameter assignment master
available
x x x x x 1
(red)
1
(red)
x x x
Bus status "Clear" x x x x x 0.5/1
(green)
0.5/1
(green)
x x x
Bus status "Operate" x x x x x 1
(green)
1
(green)
x x x
Upgrading SIMOTION devices (device update tool)
Upgrade/downgrade running x x x x 0.5/1
(green)
x x x x x
Upgrade/downgrade completed
with error
x x x x Λ
(red)
x x x x x
Upgrade/downgrade completed
without error
4)
x x x x 0
5)
x x x x x
Upgrade data is being copied from
USB stick to CompactFlash card
0.5/1
(yellow/
green)
x x x x x x x x x
Booting is not possible from the
used USB stick
0.5/1
(yellow)
min.
10 s
x x x x x x x x x
Upgrade data copying from USB
stick to CompactFlash card
completed with error
Λ
(red)
x x x x x x x x x
Upgrade data copying from USB
stick to CompactFlash card
completed without error
1
(green),
min.
10 s
2)
x x x x x x x x x