Siemens SIMOTION D425-2

PIN Signal name Signal type Meaning
4 ---- ---- Reserved, do not use
5 ---- ---- Reserved, do not use
6 RXN I Receive data -
7 ---- ---- Reserved, do not use
8 ---- ---- Reserved, do not use
A + (24 V) VO Power supply for DRIVE-CLiQ, 450 mA maximum
B M (0 V) VO Ground to 24 V
Signal type: I = Input; O = Output; VO = Voltage Output
Additional references
●
SINAMICS S120 Control Units and Additional System Components Manual
● SINAMICS S120 Booksize Power Units Manual
● SINAMICS S120 for AC Drives Manual
● SINAMICS S120 Commissioning Manual
● Terminal Modules TM15 and TM17 High Feature Commissioning Manual
● TM15/TM17 High Feature Manual
For the order numbers, see the Overview of SIMOTION documentation (separate document)
4.3 PROFINET IO interface (only for SIMOTION D4x5-2 DP/PN)
PROFINET is an open component-based industrial communication system using Ethernet for
distributed automation systems.
SIMOTION D4x5‑2 DP/PN has a PROFINET interface with three ports (X150 P1-P3) onboard.
The PROFINET interface supports operation of a SIMOTION D4x5‑2 DP/PN as an IO controller
and/or as an I device.
Interfaces
4.3 PROFINET IO interface (only for SIMOTION D4x5-2 DP/PN)
SIMOTION D4x5-2
54 Manual, 04/2014