Siemens SIMOVERT MASTERDRIVES 6SE70 VC - Communication Board Configuration

Version 1.0 March 1, 2000 Page 31
1.5 Communication Board Configuration
P060 = 4
CBx Inserted?
P711 = ?
to
P721.1…5 = ?
SLB Inserted?
P740 = ?
P741 = ?
P742 = ?
P743 = 0
P745 = ?
P746 = ?
P749.1…8 = ?
CBP Inserted?
P918.1…2 = ?
P060 = 1
Select “Board Configuration”
Menu
Parameterize CBx Boards
See Function Diagrams
Simolink Address
0: Dispatcher (Master)
>0: Transceiver (Slave)
SLB Telegram Failure Time
SLB Transmit Power
1: Up to 15 m
2: Up to 25 m
3: Up to 40 m
P743=0,
Automatic number of
node evaluation.
Enter Number of Channels
Enter Simolink Cycle Time
(must
correspond to pulse frequency, i.e. =3.2)
Simolink Receive Address =
Node. Channel
Input CBP Bus Addresses
Return to Parameter Menu
YES
NO
YES
YES
NO
NO
P740 = 0
P740
= 1