Siemens Simovert Masterdrives Compact Plus Series - Establishing the Connection between Drivemonitor and the Device; Setting the USS Interface

06.2006 Parameterization
Siemens AG 6SE7087-6KP50
SIMOVERT MASTERDRIVES Operating Instructions 8-13
The RS485 interface is multi-point capable and therefore suitable for
bus operation. You can use it to connect 31 SIMOVERT
MASTERDRIVES with a PC. On the PC, either an integrated RS485
interface or an RS232 ↔ RS485 interface converter is necessary. On
the device, an RS485 interface is integrated into the -X103 connection.
For the cable: see pin assignment -X300 and device documentation of
the interface converter.
8.4.2 Establishing the connection between DriveMonitor and the device
8.4.2.1 Setting the USS interface
You can configure the interface with menu Tools
Æ ONLINE Settings.
Fig. 8-6 Online settings
RS485 interface