Communication
6.4 Communication via PROFIBUS
Control Units CU240S
154 Operating Instructions, 07/2008 - FW 3.2, A5E00766042B AD
Failsafe inverters
Note
In case of installing a fail-safe inverter, ensure that the PROFIsafe Module is installed in
slot 1 (as shown in the figure below). In the following slot a SIEMENS telegram or a standard
telegram can be installed.
PROFIsafe Parameters
The PROFIsafe parameters are shown in the following dialog box (to be opened eg. via left
mouse double click on PROFIsafe module).
To Next Page
Loading...
