Siemens SINAMICS G120C Getting Started

Installing
3.2 Connecting
SINAMICS G120C converter
Getting Started, 04/2014, FW V4.7, A5E34264105B AA
23
3.2.4
Terminal strips
Wiring variations of the terminal strips
①
The analog input is supplied from the internal 10 V voltage.
②
The analog input is supplied from an external 10 V source.
③
Wiring when using the internal power supplies. Connecting a contact that switches to P potential.
④
Wiring when using external power supplies. Connecting a contact that switches to P potential.
⑤
Wiring when using the internal power supplies. Connecting a contact that switches to M potential.
⑥
Wiring when using external power supplies. Connecting a contact that switches to M potential.

Siemens SINAMICS G120C Specifications

General

Communication Interfaces	PROFINET, PROFIBUS, USS, Modbus RTU
Protection Class	IP20
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Power Range	0.55 kW to 132 kW
Voltage Range	380 V to 480 V
Output Voltage	0 V to Supply Voltage
Frequency Range	0 Hz to rated output frequency
Control Modes	Vector control with encoder
Protection	Overload, overvoltage, undervoltage, short circuit, ground fault
Relative Humidity	5% to 95%, non-condensing
Altitude	Up to 2000 m without derating