Siemens SINAMICS SM120 - Unpacking the Cabinets; Removing the Packaging; Figure 4-5 Transporting a Transportation Unit (Still in Packaging) with a Crane

3. Pay attention to the center of gravity imprinted on the box ② and the imprinted position of
the ropes ③.
4. Carefully raise the transportation unit.
① Spreader beam
② Center of gravity
③ Imprinted position of the rope
Figure 4-5 Transporting a transportation unit (still in packaging) with a crane
See also
Transport with a fork-lift truck (Page 55)
Transport with a crane (Page 55)
4.4 Unpacking the cabinets
4.4.1 Removing the packaging
NOTICE
Incorrect storage of unpacked devices
Proper packaging ensures that the equipment is protected. Unpackaged equipment may be
damaged if it is stored or out of service over a long period.
Refer to the storage information under "Storage" and in the section "Technical specifications".
Remove the packaging immediately prior to installation.
Preparations for use
4.4 Unpacking the cabinets
SINAMICS SM120 6SL38715
58 Operating Instructions 07/2015