Assembly
5
The Control Module does not require assembly.
Observe Chapter, "Safety instructions" when carrying out any work at the converter.
5.1 Safety instructions for assembly
WARNING
Danger as a result of defective seals
When working on the device, seals at the doors, roof panels as well as front, rear and side
panels can be damaged. Operating the device with defective seals can result in death, serious
injury or material damage.
Replace the defective seals before commissioning. Observe the environmental conditions
stated in the technical specifications.
SINAMICS SM120 6SL38715
Operating Instructions 07/2015 63
To Next Page
Loading...
