PLC Programming Tool
2.7 PLC application Download/Upload/Copy/Compare
PLC Subroutines Manual
Operating Instructions, 12/2012, 6FC5397-2EP10-0BA0
27
8. Click "OK" and you can view the upload result:
To upload a PLC application using an USB stick, proceed as follows:
1. Insert the USB stick into the USB interface at the front of the PPU.
2. Locate the PLC application (.pte file): "SYSTEM" operating area > "Sys. data" > "808D
data" > "NCK/PLC data" > "OEM PLC application (*.pte)":
3. Press the "Copy" softkey.
4. Press the "USB" softkey and paste the .pte file into the USB stick with the "Paste"
softkey.
5. Unplug the USB stick and plug it into the PC/PG.
To Next Page
Loading...
Need help?
General
