Siemens SINUMERIK 840D sl Ctrl-Energy

SINUMERIK
SINUMERIK 840D sl / 828D
Ctrl-Energy
System Manual
Valid for
Control system
SINUMERIK 840D sl / 840DE sl / 828D
Software Version
CNC Software 4.7 SP1
01/2015
6FC5397-0EP40-5BA2
Preface
Fundamental safety
instructions
1
Introduction
2
Ctrl-E Analysis
3
Ctrl-E Profiles
4
Reactive power
compensation
5
Flux reduction
6
User know-how
7
Appendix
A

Siemens SINUMERIK 840D sl Ctrl-Energy Specifications

General

Control Type	CNC
Control System	SINUMERIK 840D sl
Axis Control	Up to 31 axes
Performance Level	High
Safety Integrated	Yes
Type	Controller
Application	Machine tool control
Communication Interfaces	Ethernet, PROFINET, PROFIBUS
Integrated PLC	Yes, SIMATIC S7
Energy Management Functions	Ctrl-Energy
Compatibility	Compatible with SINUMERIK systems

Summary

Fundamental Safety Instructions

General Safety Instructions

Covers general safety guidelines, risk assessment, and warnings for operating the equipment safely.

Industrial Security Measures

Addresses industrial security measures, including protection against software manipulation and product updates.

SINUMERIK Ctrl-E Analysis for Energy Consumption

SENTRON PAC32004200 Hardware and Commissioning

Details the hardware components and commissioning steps for SENTRON PAC devices and expansion modules.

PLC Commissioning for SENTRON PAC

PLC Commissioning for Ctrl-E Analysis

Explains how to configure the PLC for energy consumption display, including data blocks and specific configurations.

HMI Commissioning for Ctrl-E Analysis

SINUMERIK Ctrl-E Profiles for Energy Saving

Controlling Machine Energy-Saving States

Details pre-defined energy-saving modes and their activation conditions, managed by the PLC.

PLC Commissioning for Ctrl-E Profiles

Creating and Editing Energy-Saving Profiles

Reactive Power Compensation

Flux Reduction for Motor Efficiency

Optimization Criterion for Flux Reduction