7.3.4 Installing the terminating connector
Procedure
Note
If you never remove the HT8 from the connection module, it is not necessary to attach the
terminating connector.
1. Unscrew the xing nut ①.
2. Attach the bracket ① for the terminating
connector ②.
3. Tighten the retaining nut and insert the
terminating connector into the bracket.
Connecting
7.3PN Basic connection module
Handheld Terminal HT 8
110 Equipment Manual, 02/2024, A5E52918633B AA
To Next Page
Loading...
