Siemens SINUMERIK 840DE SL - Page 63

• The following buttons are important for operation as SINUMERIK operator panel:
To con󹪝gure the SIMATIC Thin Client, press the button "Settings". You therefore open the
"Operator panel service system":
6HWWLQJV
2SHQ
&ORVH
To exit the SINUMERIK mode, press the button "Close".
• To make the con󹪝guration settings, press the button:
Select "Con󹪝gure Thin Client":
&RQILJXUH7KLQ&OLHQW
&ORVH
To exit the SIMATIC con󹪝guration menu, press the button "Close".
• Press the button to activate the integrated keyboard:
Preconditions
To make the following settings, you must be logged on as administrator.
1. Press the "Settings" button:
2. Log on as a administrator using the speci󹪝ed password.
Result: As administrator you can see the complete menu of the SIMATIC Thin Client.
Note
All changes only become e󹪜ective after pressing the "Enter" button on the "Virtual Keyboard" on
the relevant side.
General information and networking
4.3Networking
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA 63