Siemens SINUMERIK 840DE SL - Page 65

Parameter Range of values Default setting Meaning
SessionNumber = Number   
Password = String   
SuspendLock = Number 0 or 1 0 0: No displacement disable
1: Displacement disable set
SuspendPriority = Number 1 ... 10 1 1: Lowest priority
10: Highest priority
StartupPrio = Number   Boot sequence:
The lower the number the higher
the priority
ScreenOnFocus = String | Number  Not relevant 
ChannelOnFocus = Number  Not relevant 
[host_1]   
Address = [hostname | IP-Adresse]   From data 󹪝le structure
SessionNumber = NUMBER   
Password = STRING   
SuspendLock = NUMBER 0 or 1 0 0: No displacement disable
1: Displacement disable set
SuspendPriority = NUMBER 1 ... 10 1 1: Lowest priority
10: Highest priority
StartupActive = 0 0 or 1  Display screen after boot
StartupPrio = NUMBER 0 ... not too high  Boot sequence:
The lower the number the higher
the priority
ScreenOnFocus = STRING | NUMBER  Not relevant 
ChannelOnFocus = NUMBER  Not relevant 
   
[host_2]
...
  
[host_MaxHostIndex]   
   
[T2M2N]   
SK1 = ch_grp x 2 x 8 characters Empty Softkey inscription (2 lines)
SK2 = ch_grp x 2 x 8 characters Empty Softkey inscription (2 lines)
SK3 = ch_grp y 2 x 8 characters Empty Softkey inscription (2 lines)
...   
SK32 = ch_grp z 2 x 8 characters Empty Softkey inscription (2 lines)
...   
General information and networking
4.3Networking
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA 65