• The following buttons are important for operation as SINUMERIK operator panel:
To congure the SIMATIC Thin Client, press the button "Settings". You therefore open the
"Operator panel service system":
To exit the SINUMERIK mode, press the button "Close".
• To make the conguration settings, press the button:
Select "Congure Thin Client":
&RQILJXUH7KLQ&OLHQW
&ORVH
To exit the SIMATIC conguration menu, press the button "Close".
• Press the button to activate the integrated keyboard:
Preconditions
To make the following settings, you must be logged on as administrator.
1. Press the "Settings" button:
2. Log on as a administrator using the specied password.
Result: As administrator you can see the complete menu of the SIMATIC Thin Client.
Note
All changes only become eective after pressing the "Enter" button on the "Virtual Keyboard" on
the relevant side.
General information and networking
4.3Networking
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA 63
To Next Page
Loading...
Need help?
General
