Siemens SINUMERIK ONE MCP 2400.4c Equipment Manual

Con󹪝guration 2: NCU and PCU with direct OP
Description
1&83&8
6\VWHPQHWZRUN
&RPSDQ\QHWZRUN
;
(WK
The NCU and PCU are connected via a crossed Ethernet cable.
The NCU is the DHCP server with the IP address 192.168.214.1.
For this Eth 2 con󹪝guration, the PCU is assigned a 󹪝xed IP address in the range
192.168.214.241 – 192.168.214.249 with a subnet mask 255.255.255.0 .
General information and networking
4.3Networking
Handheld Terminal HT 8
Equipment Manual, 02/2024, A5E52918633B AA 79

Siemens SINUMERIK ONE MCP 2400.4c Specifications

General

Brand	Siemens
Model	SINUMERIK ONE MCP 2400.4c
Category	Control Systems
Language	English