Description
9229 0025 176 0A 27
2019-08-05
Heater (-R01) for condensation water protection (optional)
The surface temperature of the heater is approximately 180 °C / 356 °F.
Power consumption 50 W, rated voltage 230 V AC, optionally 110 V AC
The heater minimises condensation and corrosion of the
vacuum circuit-breaker.
To this end, the heater has to be connected to the supply
voltage (see circuit diagram included with the delivery).
Fig. 38 Example - heating (59.4)
WARNING
Hot surfaces!
Touching hot components can cause burns.
Let the heater and its surroundings cool down.
To Next Page
Loading...
