Transport, storage and packing
9229 0025 176 0A 5
2019-08-05
Transport, storage and packing
Transport
Transport weight Refer to the delivery documents for the weight of the transport unit.
Place the transport unit on a level, non-slip and pressure-resistant surface for inter-
mediate storage.
Transport vacuum circuit-breaker to the installation site or storage location in its orig-
inal transport unit.
WARNING
Unsuitable lifting gear
Incorrectly dimensioned slings or incorrectly adjusted lifting gear may cause the
transport unit to fall down.
• Do not stand below suspended loads.
• Select lifting gear, transportation and slinging equipment according to the
weight of the transport unit, including any packaging, such as transport pal-
lets.
• Observe the transport symbols.
Note
Maximum stacking height exceeded
Damage to the bottom transport unit due to excessive weight.
• For transport, no more than 3 identical transport units may be stacked on top
of each other.
• Observe loads specified on the transport unit.
Note
Unsecured transport cargo
The transport unit may slip or fall down.
Secure the load for transportation so that the transport unit cannot slip or fall.
To Next Page
Loading...
Need help?
General
