Installation
44 9229 0025 176 0A
2019-08-05
Mounting the shaft covers
Note
The shaft covers are classed as accessories.
Whether mounting is possible depends on the version of the switching device.
You can ask the manufacturer if mounting is possible.
A mounted shaft cover prevents access to open moving parts and prevents inju-
ries.
A shaft cover can be mounted on both sides to cover and
prevent contact with the circuit-breaker shaft.
• Insert expansion rivet in shaft cover (step 1).
• Mount shaft cover with the fastening elements and
the self-tapping screws (Torx, T20) to the vacuum
circuit-breaker (step 2). Tightening torque 5 ±1 Nm.
Fig. 66 Mounting the shaft cover
(optional)
To Next Page
Loading...
