Installation
48 9229 0025 176 0E
2021-11-15
Installation of the circuit-breaker shaft covers (optional)
The circuit-breaker shaft covers are accessories and depend on the design of the
switching device. You can ask the manufacturer if mounting is possible.
A mounted circuit-breaker shaft cover prevents access to open moving parts and
prevents injuries.
A circuit-breaker shaft cover can be mounted on both
sides to cover and prevent contact with the circuit-break-
er shaft.
• Insert expansion rivet in circuit-breaker shaft cover
(step 1).
• Mount circuit-breaker shaft cover with the fastening
elements and the self-tapping screws (Torx, T20) on
the vacuum circuit-breaker (step 2). Tightening
torque 5 Nm.
Fig. 68 Mounting circuit-breaker shaft cover (optional)
To Next Page
Loading...
