For your safety
9229 0025 176 0E 5
2021-11-15
For your safety
The operating instructions are an integral part of the switching device and contain
all the information for commissioning and use.
The operating instructions must be read completely, the instructions contained must
be followed and the warnings must be observed.
Smooth and safe operation of this switching device requires proper transport and
storage, professional installation and assembly, as well as careful operation and
maintenance.
Signal terms and definitions
Personal injury hazards are classified according to ISO 3864-2 using the keywords
DANGER, WARNING and CAUTION.
Indicates a hazard with a high degree of risk which, if not avoided, will result in death
or serious injury.
Indicates a hazard with a medium degree of risk which, if not avoided, could result
in death or serious injury.
Indicates a hazard with a low degree of risk which, if not avoided, could result in mi-
nor or moderate injury.
Property damage is indicated as follows:
Means that property damage can occur if the appropriate precautionary measures
are not taken.
Important information is marked with a pointing hand symbol.
Qualified personnel Qualified personnel are persons:
• Who, based on their professional training, knowledge and experience, and
knowledge of the relevant standards, are in a position to assess the work to be
carried out and to identify the possible dangers
• Who are familiar with the transport, storage, installation, assembly, commission-
ing, operation and maintenance of the product and who have the qualifications
required for their job
• Who are authorised according to the standards of safety engineering to switch
on, switch off, earth and label circuits, devices and systems
• Who are trained or instructed in the maintenance and use of appropriate safety
equipment in accordance with the standards of safety engineering
• Who are trained in first aid
To Next Page
Loading...
Need help?
General
