Central legend
9229 0025 176 0E 79
2021-11-15
Central legend
10 Withdrawable part
20 Operating mechanism
20.1 Cover made from insulating material
20.2 Metal cover
21 Name plate
22 Contact arm
22.1 Threaded bolt
22.2 Contact arm adapter
23 Isolating contact
23.1 Contact system
31 Auxiliary switch (-S1)
32 Low-voltage plug connector (-X0) (optional)
33 Plugs (Q0-X1.1, Q0-X1.2, Q0-X1.3)
33.2 Plugs (-X01) and (-X02) for withdrawable
part (optional)
34 Auxiliary contactor (-K1)
41 Operating mechanism-side insulating shell
(optional)
42 Pole head with pole contact plate
42.2 Pole head with cooling ribs
42.1 Pole head cooler
43 Vacuum interrupter
44 Pole contact plate
45 Insulator
46 Pole shell
47 System-side insulating shell (optional)
48 System-side insulating shell (above and
below) (optional)
49 Holder
51.1 1st shunt release (-Y1)
51.2 2nd release
51.3 3rd release
52 Closing solenoid (-Y9)
53 Motor (-M1)
54.1 Position switch (-S12)
54.2 Position switch (-S21)
54.3 Position switch (-S3)
54.4 Position switch (-S4)
54.5 Position switch (-S5)
54.6 Circuit-breaker tripping signal (-S6)
55 Closing spring
55.1 Spring state indicator
56.1 CLOSE pushbutton
56.2 OPEN pushbutton
56.3 Position indicator
57 Gear unit
57.1 Opening for hand crank
57.2 Hand crank coupling
58 Operations counter
59.2 Mechanical interlock/query (optional)
59.3 Key-operated interlock (optional)
59.4 Heater (-R01), for condensation water pro-
tection (optional)
59.5 Electrical closing lock-out (-Y8E) (optional)
59.6 Resistor (-R1), for undervoltage release
(-Y7) (optional)
60 Cable outlet
61 Plastic cover for opening in front of the low-
voltage plug connector
62 Protective plate, continuous
63 Protective plate, divided
64 Protective plate, angled
65 Insulating plate, transparent
To Next Page
Loading...
