Siemens SIPART DR24 User Manual

1 Technical Description
1.6 Technical Data
1.6.2 Standard Controller
Manual
96
SIP ART DR24 6DR2410
C79000-G7476-C153-03
Linearity error see AD converter
Common mode error 0.07 %/V
Temperature influence
Zero point 0.05 %/10 K
End value 0.1 %/10 K
Static destruction limit  35 V
- Current
Rated signal range 0/4 to 20 mA
Dynamic range --1 to 21 mA
Input resistance
Difference (load) 49.9 Ω  0.1 %
Common mode > 500 kΩ
Common mode voltage 0 to +10 V
Filter time constant 50 ms
Zero point error see AD converter
End value error see AD converter
Linearity error see AD converter
Common mode error 0.07 %/V
Temperature influence
Zero point 0.05 %/10 K
End value 0.1 %/10 K
Analog outputs AA1 to AA3
Rated signal range (0 to 100 %) 0 to 20 mA or 4 to 20 mA
Dynamic range 0 to 20.5 mA or 3.8 to 20.5 mA
Load voltage from --1 to 18 V
No load voltage ≤ 26 V
inductive load ≤ 0.1 H
Filter time constant 300 ms
Residual ripple 900 Hz ≤ 0.2 %
Resolution 11 bits
Load dependence ≤ 0.1 %
Zero point error ≤ 0.3 %
End value error ≤ 0.3 %
Linearity ≤ 0.05 %
Temperature influence
Zero point ≤ 0.1%/10K
End value ≤ 0.1%/10K
Static destruction limit --1 to 35 V
Measuring transducer feed L+
Ratedvoltage +20to26V
Load current ≤ 100 mA, short--circuit--proof
Short--circuit current ≤ 20 mA clocking
Static destruction limit --1 to +35 V

Siemens SIPART DR24 Specifications

General

Brand	Siemens
Model	SIPART DR24
Category	Controller
Language	English