Siemens SIPART PS2 6DR5010 Series User Manual

Introduction
12
SIP ART PS2 Manual
A5E00074631-01
The device is designed with IP65/NEMA4x degree of protection.
The intrinsically safe version can be used in hazardous areas in zone 1
or zone 2.
The explosion proof version can be used in hazardous areas in zone 1
or zone 2.
The positioner can be expanded with various options modules (chapter
2.5, page 25). The following modules are available in all:
- J
y
-module: T wo--wire current output 4 to 20 mA for position feed-
back
- Alarm module: 3 digital outputs and 1 digital input
- SIA module: one digital output for fault messages, two digital out-
puts for limit value alarms
- Manometer block: 2 or 3 manometers for single and double
action positioners
- Add--on flange (NAMUR) for safety valve block
- Add--on sets for linear and rotary actuator
Only environmentally friendly materials have been used in the
construction of the positioner .
The technical manual is printed on chlorine--free bleached paper.
Degree of
protection
Explosion
Protection
Options
Accessories
Environmental
Protection

Siemens SIPART PS2 6DR5010 Series Specifications

General

Enclosure Rating	IP66/NEMA 4X
Communication Protocol	HART
Housing Material	Aluminum or stainless steel
Type	Electropneumatic
Input Signal	4-20 mA
Supply Pressure	1.4 to 7 bar
Stroke Range	3 to 130 mm
Temperature Range	-40°C to +80°C
Ambient Temperature Range	-40°C to +80°C
Mounting	Linear or rotary actuators
Power Supply	4-20 mA loop powered