Siemens SIPART PS2 series Hardware Installation Manual

Service and maintenance
4.1 Maintenance
Venting Gauge Block Installation Instructions
20 Hardware Installation Manual, 12/2014, A5E34388399-AD
For support and the location of your local Siemens representative, refer to the table below for
the URL of the Process Instrumentation (PI) portion of the Siemens public Internet site. Once
at the site, click Support in the right column and then Product Support. Next select the type
of support desired: sales, technical (see the table below), documentation, or software.
Online Support Request http://www.siemens.com/automation/support-
request
(
http://www.siemens.com/automation/support-
request)
Technical Support 1-800-333-7421; 8 a.m. to 4:45 p.m. eastern
time, Monday through Friday (except holidays)
Customer Service & Returns
1-800-365-8766 (warranty and non-warranty)
Public Internet Site http://www.usa.siemens.com/pi
(http://www.usa.siemens.com\pi)
Technical Publications in PDF Click the above link to go to the Siemens Internet
site and then click Process Instrumentation. In
the column to the right, click Support > Manuals.
In the column to the left, select the product line
(e.g. Pressure or Temperature or Controllers) to
open navigation and search panes. Note: Naviga-
tion may change as the site evolves.

Siemens SIPART PS2 series Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Type	Electropneumatic
Input Signal	4-20 mA
Stroke Range	3 to 200 mm
Rotary Range	30 to 100°
Mounting	Linear or rotary actuators
Certifications	ATEX, IECEx, FM, CSA