Siemens SIPART PS2 Compact Operating Instructions

SIPART PS2 (6DR5...)
56 A5E03436620-06, 04/2015
See also
SIPART PS2 product information (http://www.siemens.com/sipartps2)
E-mail (mailto:support.automation@siemens.com)
Process instrumentation catalog (http://www.siemens.com/processinstrumentation/catalogs)
SIPART PS2 (6DR5...)
A5E03436620
, 04/2015
Trademarks
All names identified by ® are registered trademarks of
Siemens AG
. The remaining trademarks in this publication may be trademarks whose
use by third parties for
their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described. Since varia
nce cannot
be precluded entirely, we cannot guara
ntee full consistency. However, the information in this publication is reviewed regularly and any
necessary corrections are included in subsequent editions.
Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h