Siemens SITOP SEL1200 8 x 5 A - Connection at the Output

Installation
5.2 Connection at the output
SITOP SEL1200-1400
Equipment Manual, 06.2020, A5E46496083-2-76
49
5.2 Connection at the output
(see Chapter Technical data (Page 51))
Figure 5-2 Output connection
The loads to be supplied are connected at output terminals ③ labeled OUTPUT 1, 2, 3, 4
(1, …, 8). (terminal cross-sections, see Figure Terminal data (Page 13)).
Note
The 0
V of the loads must be routed directly to the power supply using separate cables!