Siemens SITOP UPS1600 - 6 Parameterizing the SITOP UPS1600; Buffering an S7 IO Controller, Including the I;O When the Power Fails

SITOP UPS1600 under STEP 7 V5
Getting Started,
21
Parameterizing the SITOP UPS1600
6
The following examples show you how the uninterruptible SITOP UPS1600 power supply is
parameterized:
● Buffering an S7 IO controller, including the I/O when the power fails
● Switching off the UPS by a user program when the power fails
Parameterizing the uninterruptible SITOP UPS1600 power supply for additional tasks,
please refer to the UPS1600 Manual.
6.1
Buffering an S7 IO controller, including the I/O when the power fails
Preconditions
● STEP 7 V5 has been started and a project with an S7 IO controller and SITOP UPS1600
has been opened.
● The hardware has been completely wired up.