Siemens SITRANS L Pointek ULS200 - Page 16

Pointek ULS200
16 Operating Instructions, 01/2019, A5E32268616-AB
To adjust a value:
1. Press both operating buttons.
Select adjustment (e.g. relay 1)
⇒
Current value (e.g. 0.5 m)
2. Press 1/↑.
Change value (e.g. increase to
0.75 m)
⇒
New value (e.g. new setpoint
0.75 m)
⇒
After 6 sec. delay, return to run
mode