Siemens SITRANS L Pointek ULS200 - Operational and Environmental Data

Pointek ULS200
40 Operating Instructions, 01/2019, A5E32268616-AB
10.2.2 Output
Repeatability
0.25 % of full range
Resolution
3 mm (0.1 inch)
Relay
2
2 Form C (SPDT) contacts, rated max. 5 A @
30 V DC non-inductive; min. 10 mA @ 5 V DC
OR
Transistor
2 transistor switches, rated 100 mA maximum at
48 V DC
1
See Power (Page 36), for minimum supply voltage required with DC version.
2
See Interface (Page 32), for operation up to 48 V DC.
10.3 Operating conditions
Location
Indoor/outdoor
Altitude
2 000 m max
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F)
*-20 °C (-5 °F) if metal mounting
Relative humidity
Suitable for outdoor (Type 6/NEMA 6/IP67 enclo-
sure)
Installation category
II
Pollution degree
4
10.4 Process pressure
0.5 bar (7.25 psi) max.
10.5 Switching range
Liquids
0.25 ... 5 m (0.8 ... 16.4 ft)
Solids
0.25 ... 3 m (0.8 ... 9.8 ft)
10.6 Memory
Non-volatile EEPROM