Pointek ULS200
Operating Instructions, 01/2019, A5E32268616-AB 41
10.7 Programming
10.8 Temperature compensation
Built-in to compensate over the operating range
• Three 9 mm (0.35 inch) digits for reading of
distance between sensor face and material,
multi-segment graphic for operation status.
Terminal block, 2.5 mm
2
(14 AWG) solid 1.5 mm
2
(16 AWG) stranded, maximum
Plastic OR epoxy coated aluminum with gasket
2 x ½" NPT or 2 x PG 13.5
Threaded: 2" NPT, 2" BSPT, or 2" G optional
flange adapter, to 3" ASME, DIN 65PN10, and
JIS 10K3B
1
Use only approved, suitable size hubs for watertight applications.
To Next Page
Loading...
