Siemens SITRANS L Pointek ULS200 - Relay Output Voltage and Current Limits

Pointek ULS200
34 Operating Instructions, 01/2019, A5E32268616-AB
7.1.1 Relay output - DC contact voltage and current limits
①
Switched contact voltage (V DC)
②
48 V DC max.
③
Relay contact current (A) (resistive load only)
WARNING
Electrical isolation
The DC input terminals shall be supplied from a source providing electrical isolation
between the input and output, in order to meet the applicable safety requirements of IEC
61010-1
WARNING
Suitable insulation
All field wiring must have insulation suitable for rated voltages.