Siemens SITRANS L Pointek ULS200 - Application Examples; General Applications

Pointek ULS200
25 Operating Instructions, 01/2019, A5E32268616-AB
6 Application examples
6
6.1 Applications
The device is designed for use as a process level switch. The local display is used only as
an aid during start up. The instrumentation interface is comprised solely of the two relay
outputs. Switching applications are based on the relay functions adjustment.
Note
• All level setpoints must be within the device’s range (3 m for solids, 5 m for liquids).
• Range applies to the device’s switching capability, not to the process range of the
material.