Siemens SITRANS LVL200E - Safety Label on the Instrument; EU Conformity; SIL Conformity; Installation and Operation in the USA and Canada

7
MAN-100411
SITRANS LVL200E - Operating Instructions
55328-EN-170712
reasons,onlytheaccessoryspeciedbythemanufacturermustbe
used.
To avoid any danger, the safety approval markings and safety tips on
the device must also be observed and their meaning looked up in this
operating instructions manual.
2.5 Safety label on the instrument
The safety approval markings and safety tips on the device must be
observed.
2.6 EU conformity
ThedevicefullsthelegalrequirementsoftheapplicableEUdirec-
tives.ByaxingtheCEmarking,weconrmsuccessfultestingofthe
product.
2.7 SIL conformity
SITRANSLVL200Efullstherequirementstofunctionalsafetyac-
cordingtoIEC61508orIEC61511.Youndfurtherinformationinthe
Safety Manual "SITRANS LVL200".
2.8 Installation and operation in the USA and
Canada
This information is only valid for USA and Canada. Hence the follow-
ing text is only available in the English language.
Installations in the US shall comply with the relevant requirements of
the National Electrical Code (ANSI/NFPA 70).
Installations in Canada shall comply with the relevant requirements of
the Canadian Electrical Code
2.9 Safety instructions for Ex areas
PleasenotetheEx-specicsafetyinformationforinstallationandop-
eration in Ex areas. These safety instructions are part of the operating
instructions manual and come with the Ex-approved instruments.