Siemens SITRANS TSinsert - Nameplate Structure

1.6 Nameplate structure
Positioning of the nameplate
Note
SITRANS TS100/TS200 nameplate
Before commissioning, make sure that the nameplate is attached to the temperature sensor at
a clearly visible location.
Device Positioning of the nameplate
SITRANS TSinsert 7MC701. On the bottom of the connecting plate or at the
outer periphery of the ANSI adapter.
SITRANS TS100 7MC71.. On the sensor cable
SITRANS TS200 7MC72.. On the connector or on the sensor
SITRANS TS500 7MC.5.. On the connection head
Example
PTB 22 ATEX 2001 X / IECEx PTB 22.0004 X /
Txxx °C




7
6
5

4
3
① Product name and article number ⑥ Manufacturer and manufacturing location
② Additional information on the type ⑦ Note operating instructions, certi󹪝cates and
approvals under Product documentation
(Page59)
③ Degree of protection ⑧ QR code for mobile website with device-spe‐
ci󹪝c product information
④ Serial number (S/N) ⑨ Approvals
⑤ Conformity with the country-speci󹪝c guide‐
lines
⑩ Marking for hazardous area, for example,
ATEX/IECEx
See also
Connecting the plug-in connector (Page31)
Introduction
1.6Nameplate structure
SITRANS TS100/TS200/TS300/TS500/TSinsert/TSthermowell
Compact Operating Instructions, 06/2023, A5E03920348-AH 7