Siemens SL45 - Phone Setup and Customization; Menu Mode Configuration; Device and Language Settings; Keypad Settings

25.4.01 u35gb.fm U35 /SL45- English, A31008-H4800-A2-3-7619
55
Divert
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
0HQX
Î
Divert
Set divert
Example:
The most common
condition for forwarding is:
Unanswered
This and other conditions (see box)
are set in the same way:
0HQX
Î
Divert
Î
Unanswered
Î
Set
Enter the phone number to which
a call will be diverted (if not done
already), and confirm with
2.
.
or

Displays the Addressbook
or mailbox, to select the
number to which a call will
be diverted.
After a short pause the setting is
confirmed by the network.
Unanswered
This setting covers the most important
conditions: (see also below)
If not reachable
If no reply
If busy
All calls
All calls are diverted.
S
Symbol in top line of the
display in standby mode.
Specific divert
If not reachable
Divert if the phone is switched off or
out of range.
If no reply
A call is only diverted after a delay.
The period can be set by the user to
a maximum of 30 seconds in 5
second intervals.
If busy
Divert if a call is in progress.
If “
Call waiting
“ is activated (see
p. 64) you will hear the call waiting
tone (see p. 15) even if the “
If busy
“
diversion has been set.
Receiving fax
Fax calls are diverted to a phone
number with a fax connection.
Receiving data
Data calls are diverted to a phone
number with a PC connection.