Siemens SM 338 - Page 42

5-6
SM 338 Equipment Manual
(4) J31069-D401-U1-A0-7618
(* Infos (header) for data record 1 *)
KH = 8014 (* Offset for net data, data record 1 in bytes *)
KH = 010E (* Identifier for data record 1; length: 14 bytes *)
KH = 0000 (* Reserved *)
(* Parameters of the module *)
KH = FF44 (* Channel diagnostics; diagnosis and end-of-cycle alarm *)
KH = 2143 (* S1: meas. pts 2,1 -> counters 2,1; meas. pts 4,3 -> counters 4,3 *)
KH = 8200 (* 0.05 mm, r. ed., START-I, 1 msec; S2: meas. pts 2,1 -> free *)
KH = 0000 (* S2: meas. pts 4,3 -> free; 0.1 mm, r. ed., START-I, 16 msec *)
KH = 0000 (* S3: meas. pts. 2,1 free; meas. pts 4,3 -> free *)
KH = 0000 (* 0.1 mm, r. ed., START-I, 16 msec; S4: meas. pts 2,1 -> free *)
KH = 0000 (* S4: meas. pts 4,3 -> free; 0.1 mm, r. ed., START-I, 16 msec *)
KH = 0000 (* Cycle time 16 msec; sensors asynchronous *)
O
p
e
r
a
tion