Need help?Do you have a question about the Siemens SI220 and is the answer not in the manual?
General| Type | Control Unit |
|---|---|
| Manufacturer | Siemens |
| Model | SI220 |
| Supply Voltage | 24 V DC |
| Protection Class | IP20 |
| Mounting | DIN Rail |
| Number of Digital Inputs | 8 |
| Number of Analog Inputs | 4 |
| Number of Analog Outputs | 2 |
| Relative Humidity | 5% to 95% (non-condensing) |
| Communication Interface | Ethernet, RS-485 |
| Resolution (Analog Inputs) | 12 bits |
| Resolution (Analog Outputs) | 12 bits |
| Certifications | CE, UL |
Outlines safety precautions and guidelines for safe operation and installation.
Details various logical input types and their configurable parameters.
Details various logical output types and their partition assignments.
Configures telephone numbers for communication with the control panel and ARC.
Lists and selects available communication protocols for ARC connections.
Defines methods for verifying alarms, including audio/video and callback.
Configures automatic test call synchronization and fixed intervals.
Configures up/download, pager transmission, and log transmission for service stations.
Defines how individual inputs are transmitted per input and receiver.
Configures transmission to CMS/ARC with or without protocol and message types.
Defines how system inputs (PA Keypad, Tamper, Mains/Battery Failure) are transmitted.
Configures transmission of system inputs to CMS/ARC with protocol options.
Configures transmission of system inputs to service stations or as SMS.
Lists all configured E-bus devices such as keypads, transponders, and gateways.
Manages engineer PINs, including changing, creating, deleting, and printing.
Allows engineers to change their own personal PIN for system access.
Provides functions for creating, deleting, and managing engineer PINs.
Explains the structure of global and access log books for system event tracking.
Explains engineer reset functions as detailed in the 'System' menu.
Refers to system programming functions detailed in the 'System' menu.
Refers to telecom options detailed in the 'ARC' menu.
Refers to time functions detailed in the 'Miscellaneous' menu.
Introduces the various test functions available for system validation.
Details how to perform a walk test for individual partitions to verify inputs and outputs.
Explains how to test individual inputs for triggering, resetting, and status indication.
Enables inputs to be switched to soak test for logging without triggering alarms.
Allows testing of all outputs by switching them ON and OFF in individual partitions.
Guides on performing transmission tests to verify communication with Sylcom and receivers.
Enables testing of audio/video peripherals, including changeover and voice/video tests.
Allows performing a test setting, ignoring "cannot set" situations.
Configures automatic test call start times and offsets.
To Next Page