ARC
75
Siemens Building Technologies
Fire Safety & Security Products 07.2009
Transmission to Receiver 1 without backup transmission:
Receiver 1 Receiver 2
Tel 1
X X X X
Tel 1
Tel 2
X X X X
Tel 2
Tel 3
X X X X X X X X
Tel 3
Transmission to Receivers 1 & 2 without backup transmission:
Receiver 1
Tel 1
X X X X
Tel 2
X X X X
Tel 3
X X X X X X X X
Receiver 2
Tel 1
X X X X
Tel 2
X X X X
Tel 3
X X X X X X X X
Transmission to Receiver 1 & 2 with backup transmission:
Receiver 1 Receiver 2
Tel 1
X X X X
Tel 1
X X X X
Tel 2
X X X X
Tel 2
X X X X
Tel 3 Tel 3
X X X X X X X X
Transmission to Receiver 2 with or without backup transmission:
Receiver 1 Receiver 2
Tel 1 Tel 1
X X X X
Tel 2 Tel 2
X X X X
Tel 3 Tel 3
X X X X X X X X
13.7 Test settings
13.7.1 Automatic Test
1. Synchronised The test call synchronizes itself by means of the last transmission.
2. Fixed The test call is always made at fixed intervals, referring to “Test periodicity”
13.7.2 Automatic Test
Only when system set This parameter determines whether the automatic test call is always made or only if the complete system is
set. It enables the automatic test call to be limited to the time period in which the complete system is set.
To Next Page
Loading...
