Siemens SI220 - Delete Radio; Configuration Radio

Engineer Management
97
Siemens Building Technologies
Fire Safety & Security Products 07.2009
19.10.2 Delete Radio
[TM922] Deletion This menu function enables radio equipment to be deleted. On deletion, the address is again released.
Equipment type Each equipment type has an independent addressing for each radio receiver. Each equipment type begins
with Address 1. The following equipment types can be selected:
z Radio detectors
z Radio remote keypads
Retrospective deletion If a radio equipment was inadvertently deleted, it must be re-addressed.
Radio configuration All radio components of this equipment type are displayed. The status of Address 1 is shown at the first
position and that of Address 2 at the second position etc.
19.10.3 Configuration Radio
[TM923] Radio configu-
ration
This menu function enables the radio configuration to be displayed.
Equipment type Each equipment type has an independent addressing for each radio receiver. Each equipment type begins
with Address 1. The following equipment types can be selected:
z Radio detectors
z Radio remote keypads
Radio configuration All radio components of this equipment type are displayed. The status of Address 1 is shown at the first
position and that of Address 2 at the second position etc.