Siemens SI220 - 18 Ebus Devices; Hardware Status; Declared Number; Declared; Connected Number; Connected

Ebus Devices
86
Siemens Building Technologies
Fire Safety & Security Products 07.2009
18 Ebus Devices
This menu is to monitor all devices. It will show all installed, programmed and faulty
devices.
NOTE
Press the configuration button at the panel for about 10 seconds, then all actual information will be
updated and displayed.
18.1 Hardware Status
The System Power Status shows the failures in terms of:
z Battery
z Main
z Fuses
z Transmitter Board
z Listen Board
z Vocal Transmitter
z Vocal Board
18.2 Ebus Devices
New devices can only be added by keypad.
1. Delete devices by double click the tick box
2. Confirm the Warning message with
Î All configurable devices are listed as followed:
– Keypads
– Power Supplies
– Transponders
– Audio/Video
– RF Gateway
– Output Module
– E-Bus Gateway
18.2.1 Declared Number / Declared
Number of all connected and learned devices are listed according to the name.
18.2.2 Connected Number / Connected
Number of all connected devices listed according to the name.