Calendars
85
Siemens Building Technologies
Fire Safety & Security Products 07.2009
17 Calendars
[TM731] Calendar 8 calendars can be defined in the time functions, which can be used for the following functions.
z Automatic set and unset (refer also to Partitions TM513)
z Switch-off time of output function
17.1 Calendar Number
You can define weekly schedules within max. 6 time slots - at each Partition
Time window The time must be input using the 24-hour system. If in one calendar, for instance, only one switch-on time
but not switch-off time is to be defined, the switch-off time must be left as XX:XX. If a time has already been
entered, this can be reset to XX:XX using the @ key.
To Next Page
Loading...
