Siemens SN65EX10CE User Manual

Setting up and connectingde
adjacent worktop, which is firmly
connected to the neighboring
cupboards.
1.Follow the safety instructions.
→ page 4
4.4 Drinking water connection
Connect your device to a drinking
water connection.
Install drinking water connection
2.Follow the instructions for electrical
connection.
Hints
¡Make sure you do that
Connect the device to a water inlet
with a safety device to prevent
drinking water contamination
through backflow (according to DIN
EN 1717). The connection valves/
water taps provided for this purpose
are equipped with this safety device
if the house is installed correctly.
¡If you replace the device,
you must use a new water inlet
hose.
3.Check the scope of delivery and
the condition of the device.
4.Take the required installation dimensions
from the assembly instructions.
5.Set up the device horizontally using
the adjustable feet.
Make sure you have a secure footing.
6.Install the wastewater connection.
→ Page 13
7.Install the drinking water
connection. → Page 13
8th.Connect the device to power.
1.Please refer to the assembly
instructions provided for the
necessary steps.
4.3 Waste water connection
Connect your device to a wastewater
connection so that water
contaminated by the rinse cycle can
drain away.
2.Connect the device to the drinking
water connection using the
included parts.
Observe the technical data.
Install waste water connection
3.Make sure that the drinking water
connection is not kinked, crushed or
twisted.
1.Please refer to the assembly
instructions provided for the
necessary steps.
2.Connect the waste water hose to
the drain connection of the siphon
using the included parts.
4.5 Electrical connection
Connect the device electrically
3.Make sure that the drain hose is not
kinked, crushed or twisted.
Hints
¡Observe the safety instructions
wise → page 4 .
¡Please note that the water
Safety system only works when
there is power supply.
4.Make sure that there is no cover in
the drain that prevents the waste
water from flowing out.
1.Insert the cold appliance plug of the
mains connection cable into the
device.
13

Siemens SN65EX10CE Specifications

General

Brand	Siemens
Model	SN65EX10CE
Category	Dishwasher
Language	English