Cleaning and carede
If the machine care indicator on the
control panel lights up or the display
advises you to do so, carry out the
machine care without dishes. After you
have carried out the machine
maintenance, the display goes out. If
your device does not have a reminder
function, we recommend carrying out
machine maintenance every 2 months.
Only use machine care products
that are specifically designed for
dishwashers.
4.Pour the machine cleaner into the
cleaner chamber until it is
completely full.
Do not add machine cleaner to the
interior of the device.
5. press.
press.
Carry out machine maintenance
6.
Hints
¡Run the machine program
Carry out cleaning without the dishes
being put away.
¡Use only specifically for
Machine care products and machine
cleaners suitable for dishwashers.
¡Make sure that there are no
Aluminum parts, e.g. B. grease filters from
extractor hoods or aluminum pots, are
located in the washing compartment of
the device.
¡If you care for the machine
If you have not carried out 3 rinse
cycles, the machine care display will
automatically go out. ¡In order to
achieve optimal cleaning performance
To maintain safety, pay attention to the
correct placement of the cleaners.
¡Observe the safety instructions
on the packaging of machine care
products and machine cleaners.
¡Turn on the function
→
"glassZone", page 26
to.
aMachine maintenance is carried out
leads.
aWhen the program is finished,
the machine care display goes out.
17.5 Sieve system
The sieve system filters coarse
impurities from the flushing circuit.
3
2
1
1
Micro sieve
fine sieve
coarse sieve
2
3
1.Remove any coarse dirt in the
interior with a damp cloth.
Clean sieves
Impurities from the rinse water can
clog the sieves.
1.After each rinse, check the sieves
for residue.
2.Clean the sieves.
3.The machine care
internal space of the device
average in domestic
place s.
47
To Next Page
Loading...
Need help?
General
