Before first usede
5.Hang the glassZone in the upper
dish rack and lock it into place.
Requirement:The device is set up and
connected. →
page 12
1.Pour in special salt. →
Page 28
2.Fill in rinse aid. →
Page 30
3.Turn on a device. →
Page 36
4.Set the softening system.
→
Page 28
5.Adjust the amount of rinse aid added.
→
Page 30
6.Fill in the cleaner
→
Page 31
.
7.Start the program with the highest
cleaning temperature without
dishes.
Make sure the hooks are in the
correct position. aThe glassZone
clicks into place audibly.
We recommend operating the
device without dishes before first
use due to possible water stains and
other residues.
6.Insert the upper dish rack.
Tip:These settings and other basic
settings →
Page 39
you can change it
again at any time.
v9 Before the first
use
or the first use
Before first use
E1softening system 0 softening system
9.1 Carry out initial
commissioning
EHard, calcareous water leaves
limescale residue on the dishes and
the washing container and can clog
parts of the appliance.
To get good washing results, you can
soften water using the softening
system and special salt. To avoid
damage to the device, water with a
hardness above 7 °dH must be
softened.
softening system
You must make settings when you
first use it or after resetting to factory
settings.
Tip:Connect your device to a mobile
device. You can easily adjust all
settings using the Home Connect
app.
10.1 Overview of the water hardness settings
Here you will find an overview of the adjustable water hardness values.
You can ask the local waterworks or determine with ter.The water hardness level
a water hardener
27
To Next Page