Cleaning and carede
17.6 Clean spray arms
Limescale and impurities from the
rinse water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
1.Unscrew the upper spray arm and
pull it downwards.
1
2
2.Pull the lower spray arm upwards.
3.Check the outlet nozzles of the spray
arms for blockages under running
water and remove foreign bodies if
necessary.
4.Insert the lower spray arm. aThe
spray arm audibly clicks into place.
5.Insert the upper spray arm
and screw tight.
49
To Next Page
Loading...
Need help?
General
