Basic settingsde
basic
position
Display text
S:011
Selection
S:00 - S:01
Description
TimeLight Turn TimeLight on or off.
While the program is running,
status information about the
time delay, the program or the
remaining time is projected
onto the floor below the device
door. With the base panel
pulled forward
or when installed high with a
flush furniture front, the
display is not visible.
The level "S:00" switches the
TimeLight off.
Starter program SP:011 SP:00 - SP:01 Set predefined program
when switching on the device.
¡When hiring
"SP:00" is the last program
selected when the device is
switched on.
set.
¡When hiring
"SP:01" is the Eco 50°
program preset when the
device is switched on.
Signal volume SL:021 SL:00 -SL:03 Control the signal volume.
The level "SL:00" switches off
the beep.
If the Eco drying function is
activated, the program does
not end
acoustically indicated by a
signal tone.
Key volume bL:021 bL:00 - bL:03 Adjust the key volume
during operation. The level
"bL:00" switches off the key
tones.
1Factory setting (may vary depending on device type)
41
To Next Page
Loading...
