Siemens SOMATOM User Manual

0.0
09/2008 0.0
A.3-1 0.0
CHAPTER A.2
A.3
Operation
UPS operating modes A.3
The uninterruptible power supply can be operated in different
modes.
A.3
Normal mode A. 3 During normal operation, the mode indicator illuminates and
the load level indicators display the percentage of UPS load
capacity being used by the protected equipment. The UPS mon-
itors and charges the batteries as needed and provides power
protection to your equipment.
A.3
Battery mode A. 3 When the UPS is operating during a power outage, the alarm
beeps and the battery mode indicator illuminates. The protected
equipment is now powered by the UPS. When power returns the
UPS returns to normal operation while the battery recharges.
A.3
The length of time that the battery can provide backup power
during a power failure depends on the charging level of the bat-
tery.
A.3

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM