Siemens SOMATOM User Manual

0.0
09/2008 0.0
A.5-1 0.0
CHAPTER A.4
A.5
Location of Labels
Labels A.5
The location of labels is depicted in the schematic representa-
tion of the equipment.
A.5
The labels can be found at the positions indicated by reference
lines and numbers in the corresponding figures.
A.5
B .5 A
The numbers and parameters on the labels are examples only,
always refer to the original labels which are located on the sys-
tem components. A.5

Siemens SOMATOM Specifications

General

Category	CT Scanner
Rotation Time	0.25 seconds
Tube Voltage	70-150 kV
Bore Size	78 cm
Max Table Load	250 kg
Gantry Aperture	78 cm
Table Weight Capacity	250 kg
X-ray Tube Voltage	70-150 kV
Scan Time per Rotation	0.25 seconds
Software	Syngo
Connectivity	DICOM