Softening system
To get good washing results, you can
soften water using the softening
system and special salt. To avoid
damage to the device, water with a
hardness above 7 °dH must be
softened.
10
softening system
Hard, calcareous water leaves
limescale residue on the dishes and
the washing container and can clog
parts of the appliance.
10.1
Overview of the water hardness settings
Here you will
find an overview of the adjustable water hardness values.
You can ask your local waterworks about the water hardness level or use a water
hardness tester.
Water
hardness level
°dH
Hardness range mmol/l Setting value
0 -
6
7-8
9-10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
soft
soft
medium
medium
medium
hard
hard
hard
0 - 1.1
1.2 - 1.4
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
H00
H01
H02
H03
H04
H05
H06
H07
A
notice:Set your device to the
determined water hardness level.
→
"Setting the softening system",
page 26
If the water hardness level is 0 - 6 °dH,
you can avoid using special salt for
dishwashers and switch off the
softening system.
→
"Switch off the softening system",
page 27
2. press.
3.
To open the basic settings,
3 seconds
press.
a
The display shows Hxx. a
The
display shows .
4. Press repeatedly until the
appropriate water hardness level is
set.
The value H04 is set at the factory.
10.2
Setting the softening
system
5.
To save the settings,
Press for 3 seconds.
Set
the device to the water hardness
level.
1.Determine the water hardness level
and
the appropriate setting value.
→
"Overview of the water
hardness settings", page 26
26
To Next Page
Loading...
Need help?
General
