Siemens SR53HS52ME User Manual

aThe program is aborted
and is completed after approx. 1
minute.
service
14.6 Activate key lock
The key lock prevents the device
from being used undesirably or
improperly during operation.
14.10 Switch off the device
1.
The instructions for safe use →
Page 10 observe.
▶ Press for approx. 3 seconds.
a
The key lock is activated and
is automatically deactivated
when the program ends.
aWhen the device is operated,
flashes in the display.
aIn the event of a power failure, it remains
Key lock activated.
2. press.
Tip:
If you press during the rinse cycle,
the current program will be
interrupted. When you turn on the
device, the program continues
automatically.
14.7
Deactivate key lock
▶ Press for approx. 3 seconds.
14.8
Interrupt program
A
notice:If you open the appliance door
when the appliance is heated up, leave the
appliance door ajar for a few minutes and
then close it. This will prevent excess
pressure from building up in the device
and causing the device door to pop open.
1. press.
a
The program is saved
and the device switches off.
2.
To continue the program, press .
14.9
Cancel program
To
end a program prematurely or to
change a program that has been
started, you must cancel it.
approx. 4
seconds▶
press.
a
All indicators light up.
aOnce the
ads are out,
The display shows “0h:01m” and the
remaining water is pumped out.
36

Siemens SR53HS52ME Specifications

General

Brand	Siemens
Model	SR53HS52ME
Category	Dishwasher
Language	English